Grandstream GDS3725/GDS3726 In-Wall Mounting Box in Africa
Create a clean, recessed installation for compatible Grandstream smart IP video door stations with the GDS372X flush-mounting box. Designed for the GDS3725 and GDS3726, this installation accessory helps integrators place the door station neatly within solid walls, stud frameworks, or drywall cavities while preserving a professional entrance appearance. FourTeck assists African businesses, contractors, resellers, and security-system integrators with accessory matching, project quantities, delivery coordination, and practical pre-installation guidance.
Request QuoteCheck Africa Availability
Quick Product Information
Grandstream
GDS372X Flush-Mounting Box
In-wall mounting accessory
GDS3725 and GDS3726
Flush-mount installation
Solid wall, stud, and drywall
Plastic box and zinc-alloy cover
Availability and quantity dependent
Model matching and quote assistance
Professional installer recommended
Product Overview
A smart video door station is one of the most visible components in an access-control system. Its position, alignment, cable entry, wall finish, and mechanical support all affect the final quality of the installation. The Grandstream GDS372X flush-mounting box addresses these physical installation needs for the GDS3725 and GDS3726. Instead of attaching the entire door station over the finished wall, the compatible box allows the installer to recess the unit so that the exposed profile is reduced and the entrance looks more integrated.
The accessory consists of a plastic in-wall box and a zinc-alloy decorative cover. The plastic box provides the recessed housing area, while the decorative cover creates a tidy transition between the installed door station and the surrounding wall surface. This combination is particularly useful where architects, facilities teams, property managers, or clients want the access-control equipment to look intentional rather than added after construction. It can suit new developments as well as refurbishment projects, provided the wall can be safely prepared and the required cabling is available.
Grandstream specifies compatibility with the GDS3725 and GDS3726 smart IP video door stations. That distinction matters because mounting accessories are shaped around particular device dimensions, fastening points, cable access locations, and faceplate profiles. A visually similar box from another series may not align correctly. Buyers should therefore order by the exact accessory model and confirm the paired door station before installation work begins.
The mounting box supports solid wall, stud, and drywall or hollow-wall installation. Each environment requires a different preparation method. Masonry projects may involve cutting, dust control, anchoring, conduit planning, and surface repair. Stud-wall projects require attention to structural placement and cavity clearance. Drywall projects need careful cutout work, edge protection, and secure fixing to avoid movement around a frequently used entrance device. Local building and electrical requirements should guide the work in every case.
For African business projects, practical purchasing questions often extend beyond the accessory itself. Integrators may need to coordinate the compatible door station, PoE source, network cable, door lock wiring, exit button, door sensor, protective accessories, installation tools, and project documentation. FourTeck helps buyers review these dependencies, request the right quantity, compare related accessories, and plan supply according to location and project schedule.
Key Business Benefits
A mounting accessory may appear simple, but the correct enclosure can prevent costly finishing work, reduce installation uncertainty, and improve the appearance of an access-control point. The following benefits show why the correct flush-mount box matters in a commercial project.
◆ Cleaner Entrance Finish
Recessing the door station reduces the visual bulk of a surface installation. This is valuable in offices, hotels, residential lobbies, schools, hospitals, and modern commercial buildings where the entrance hardware must complement the surrounding design.
✓ Model-Specific Fit
The accessory is designed around the GDS3725 and GDS3726. Correct compatibility supports better alignment, appropriate fastening, a more consistent faceplate position, and a more predictable result than adapting a generic electrical box.
⚙ Flexible Wall Options
Support for solid walls, studs, and drywall gives integrators flexibility across different construction types. The same accessory can be specified for several project environments while the installation method is adapted to the wall structure.
● Better Project Planning
Knowing the box dimensions before finishing the wall helps contractors coordinate cutouts, conduits, network cabling, lock wiring, plastering, painting, and final equipment installation in the correct order.
↗ Easier Multi-Site Standardisation
Organisations deploying the same door-station model across branches can standardise the mounting accessory, installation drawing, finish expectations, and contractor instructions, improving consistency from one site to another.
🔒 Protected Cable Transition
A planned recessed enclosure provides an organised area for the cable transition behind the unit. Proper routing helps reduce strain, sharp bends, exposed loops, and last-minute modifications around the entrance hardware.
These benefits are strongest when the mounting box is included during the design stage rather than added after the wall is complete. Early coordination gives the builder, electrician, network installer, security contractor, and facilities team a shared reference for placement and finishing. FourTeck can support project buyers with model confirmation and accessory lists so the hardware package is reviewed before site work reaches the final fit-out stage.
Product Highlights
Designed for recessed installation of selected GDS3720-series door stations.
Specified for the Grandstream GDS3725 and GDS3726.
Plastic in-wall box paired with a zinc-alloy decorative cover.
Suitable for solid, stud, and hollow-wall preparation.
The GDS372X mounting box is not an electronic device and does not add network, access-control, camera, intercom, or power functionality by itself. Its value is mechanical and architectural: it creates the correct recessed installation environment for a compatible door station. This distinction should be clear in purchase orders so project teams do not confuse the mounting accessory with the GDS3725 or GDS3726 unit.
The in-wall box measures 130 x 250.3 x 41.5 mm and weighs 179 g. The decorative cover measures 125.5 x 254.8 x 4.5 mm and weighs 254 g. These dimensions should be used for planning and verification, while the official installation documentation and the physical accessory should guide final marking and cutting. Wall finishes, tile edges, stone cladding, render thickness, plasterboard layers, waterproof membranes, and existing conduits can affect the practical recess required on site.
Grandstream suggests positioning the compatible device with its bottom approximately 50 to 52 inches above the ground. This is a general manufacturer recommendation rather than a substitute for project-specific accessibility, camera-view, user-height, architectural, or regulatory requirements. The installer should review the entrance layout before fixing the final height.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Grandstream |
| Model | GDS372X Flush-Mounting Box |
| Product Category | In-wall mounting box for smart IP video door stations |
| Compatible Devices | Grandstream GDS3725 and GDS3726 |
| Mounting | Flush-mount |
| Wall Types | Solid wall, stud wall, and drywall or hollow wall |
| In-Wall Box Material | Plastic |
| Decorative Cover Material | Zinc alloy |
| In-Wall Box Dimensions | 130 x 250.3 x 41.5 mm |
| In-Wall Box Weight | 179 g |
| Decorative Cover Dimensions | 125.5 x 254.8 x 4.5 mm |
| Decorative Cover Weight | 254 g |
| Suggested Device Height | Bottom of compatible device approximately 50–52 inches above ground, subject to site requirements |
| Electronic Functions | None; this is a mechanical installation accessory |
| Availability | Country, supplier, order quantity, and project schedule dependent |
Use the table as a procurement and design reference, not as a replacement for the official installation guide. Before creating an opening, compare the accessory, template, wall build-up, and final finished surface. A rough structural opening may differ from the external dimensions because fixing points, cover overlap, cable bend radius, connector clearance, and finishing tolerance must be considered.
The wall should provide enough depth for the box and the cabling behind the door station without crushing connectors or forcing sharp bends. Where conduit enters the recess, its position should not obstruct the unit, fasteners, or locking mechanism. The installer should also separate network, low-voltage control, and mains circuits according to local regulations. The mounting box does not replace required junction boxes, surge protection, weather sealing, drainage planning, or structural reinforcement where those are specified by the project.
Configuration and Buyer Guidance
The first buying decision is compatibility. Confirm that the planned device is the GDS3725 or GDS3726. Similar Grandstream door stations may use different mounting accessories, and a generic description such as “GDS wall box” is not precise enough for a purchase order. Record the complete accessory model, paired door-station model, project quantity, and required delivery location.
1. Confirm the wall type
State whether the installation is in concrete, brick, blockwork, a timber or metal stud partition, or a hollow drywall system. This affects tools, anchoring, reinforcement, finishing, and labour.
2. Plan the cable route
Identify the Ethernet or PoE cable, lock wiring, exit button, sensor, alarm inputs, and any other low-voltage connections that must reach the door station.
3. Review the finished surface
Tiles, stone, render, cladding, acoustic panels, decorative laminates, or multiple plasterboard layers can alter the final depth and cover alignment.
4. Coordinate installation timing
Decide whether the box is fitted during first fix, wall finishing, or final security installation. Late changes can require avoidable cutting, patching, repainting, or tile replacement.
Buyers should also confirm whether related components are included in the same order. The flush-mounting box does not include the GDS3725 or GDS3726 door station, PoE switch or injector, structured cabling, door lock, power supply, exit button, door sensor, access credentials, rain cover, network switch, software service, or installation labour unless a quotation explicitly lists them. For multi-door projects, provide a door schedule showing the quantity, wall type, door-station model, lock type, cable distance, and site location for each entrance.
Warranty handling should be reviewed separately for the accessory and the electronic door station. Keep packaging, labels, serial details for the electronic device, purchase records, and installation documents. Physical damage caused by incorrect cutting, over-tightening, unsuitable fixings, water ingress, wall movement, or non-compliant installation may fall outside normal warranty expectations. FourTeck can help clarify the supply scope before order placement.
Ideal Business Use Cases
The GDS372X box is best suited to projects where the entrance device must be recessed and the design team has selected a GDS3725 or GDS3726. It is not necessary for every installation; some sites may prefer surface mounting because of wall constraints, heritage restrictions, temporary fit-outs, or easier future relocation. The following environments commonly benefit from a planned flush-mount approach.
Corporate Offices
Reception entrances, staff-only doors, executive floors, server rooms, and restricted departments often require access equipment that looks professional and aligns with interior finishes.
Apartment and Mixed-Use Buildings
Main gates, lobby doors, shared facilities, and service entrances can use recessed door stations to create a more integrated appearance in high-traffic common areas.
Hotels and Hospitality
Back-of-house access points, staff entrances, secure offices, delivery areas, and selected guest zones may require controlled entry without visually bulky surface hardware.
Schools and Campuses
Administration blocks, laboratories, residence halls, libraries, and controlled gates can benefit from consistent mounting standards across several buildings.
Healthcare Facilities
Clinics, hospitals, pharmacies, stores, and restricted clinical areas often need entrances that are easy to identify, cleanly finished, and integrated with broader security procedures.
Warehouses and Industrial Sites
Security offices, controlled production zones, dispatch entrances, and staff access points can use the box where the wall structure and environmental protection plan support recessed installation.
Retail chains, banks, government offices, telecom facilities, data centres, logistics hubs, residential estates, and gated business parks may also use the accessory. The deciding factor is not the industry name but the combination of compatible hardware, wall suitability, desired appearance, and maintenance plan. In high-impact or exposed locations, the project team should assess how the recessed position interacts with vandal resistance, rain exposure, direct sunlight, drainage, cleaning, and future service access.
Grandstream GDS372X Flush-Mount Integration
Flush mounting changes the relationship between the door station and the wall. In a surface installation, most of the device body sits forward of the finished surface. In a recessed installation, the wall opening receives the mounting box and the decorative cover defines the visible edge. The result can look more architectural, but it also demands better coordination because alignment errors are harder to hide after plaster, paint, tile, or cladding work is complete.
A good installation begins with a level reference line and a verified entrance layout. The installer should consider the camera’s intended field of view, the position of the call button or keypad, approach direction, wheelchair access, average user height, door swing, nearby handles, lighting, signage, and the route people take when presenting a card or using the intercom. Grandstream’s suggested mounting height is a useful starting point, but the final position should fit the actual site.
The wall opening should be prepared using official documentation and careful physical checks. Cutting solely from a web listing is not recommended because construction tolerance, finish thickness, and regional installation practice vary. On masonry, the contractor should avoid weakening edges, lintels, columns, waterproofing, and embedded services. On stud walls, the box must not float in an unsupported section where repeated use could cause movement. On drywall, fixing pressure should be controlled so the board is not crushed or cracked.
The decorative cover helps create a neat boundary, but it cannot compensate for a severely uneven opening, loose substrate, protruding conduit, twisted box, or excessive surface variation. Careful preparation protects the appearance of the entrance and makes final device installation more efficient. For project deployments, create one approved sample installation before repeating the method across multiple doors.
Grandstream GDS372X Wall and Cable Planning
The mounting box is only one part of the physical pathway. Behind it, the project may need Ethernet cabling, PoE delivery, lock-control wiring, alarm connections, a door sensor, an exit button, and other low-voltage services supported by the selected door-station design. These cables should arrive at the recess in a controlled position with enough service length for termination but without excessive loops that prevent the unit from seating correctly.
Cable bend radius matters, especially for structured network cable. A sharp fold behind the device can affect performance or damage the conductor pairs. Conduit should terminate where it does not collide with the back of the station or mounting hardware. Where several cables enter the same recess, label them before final finishing. Clear labels reduce commissioning time and lower the risk of connecting a lock, sensor, or network cable incorrectly.
Outdoor or semi-exposed installations require additional attention. The door station may carry an environmental rating, but the surrounding wall opening, conduit entry, sealant, drainage, and building envelope must also be detailed correctly. The mounting box alone does not waterproof a wall. A rain cover or architectural canopy may be considered where exposure is severe, but compatibility and the effect on the flush installation should be reviewed before ordering.
For long cable runs, check the network design, PoE budget, switch capacity, surge environment, grounding practice, and any local lightning-protection requirements. In large buildings, identify the network cabinet and switch port associated with each entrance. Document the cable route and retain photographs before the wall is closed. These records make future maintenance easier and help facilities teams locate hidden conduits without unnecessary demolition.
Grandstream GDS372X Installation Quality and Maintenance
A recessed installation should remain serviceable after handover. The face of the door station must be accessible for approved maintenance, inspection, cleaning, or replacement without damaging the surrounding wall. Avoid burying fasteners under permanent finishes or applying sealants that make normal removal impossible. Where sealing is needed, use a method suitable for the wall material and maintenance plan.
Before fixing the accessory permanently, verify that the box is level, square, at the correct depth, and aligned with the door. Check that the decorative cover will sit evenly against the finished surface. Small errors at the rough-in stage become highly visible after installation because the cover creates a straight reference line against tiles, panels, or painted walls. A sample fit before final finishing can reveal problems while they are still easy to correct.
During commissioning, inspect the entrance from several angles. Confirm that the camera view is not obstructed by a wall return, column, gate post, signage, or deep recess. Check that users can reach the keypad or call button comfortably and that the microphone and speaker are not blocked. Test access credentials, calls, door release, sensor status, alarms, and network stability according to the door-station configuration.
Maintenance teams should keep the exposed cover clean using methods suitable for its finish and avoid abrasive tools that could damage the surface. Any movement, cracking, water marks, loose edges, or cable faults should be investigated early. For multi-site deployments, keep a record of the accessory model and installation photographs so replacement planning does not depend on guesswork years later.
What Buyers Should Check Before Purchase
Before requesting a quote, buyers should confirm the complete physical and electronic scope. Ordering only by the words “in-wall box” can lead to an accessory mismatch, missing installation items, or a box arriving after the wall has already been finished. A concise project brief allows FourTeck to review the request more effectively.
Correct Model
State whether the paired unit is GDS3725 or GDS3726. Do not assume compatibility with other GDS models without written confirmation.
Wall Construction
Provide the wall type, finish material, available cavity depth, and whether reinforcement or masonry cutting will be required.
Required Accessories
List the door station, rain protection, credentials, PoE equipment, lock hardware, sensors, exit buttons, and cabling required for the complete entrance.
Project Quantity
Share the number of doors, spare-unit policy, rollout phases, and whether several sites need coordinated supply.
Installation Responsibility
Confirm which contractor will prepare the wall, pull cables, fit the box, install the door station, configure the network, and test the lock.
Delivery and Warranty
Provide the destination, target date, procurement terms, and expectations for product documentation and warranty guidance.
Buyers should also distinguish between accessory cost and total installed cost. The box may be a small line item, while labour for masonry cutting, reinforcement, conduit, finishing, repainting, network work, lock integration, and commissioning can be more significant. Including the accessory early can reduce rework and create a clearer contractor scope.
For replacements, send clear photographs and the exact model label rather than relying on appearance. Existing GDS installations may use an older in-wall kit with different dimensions. For new projects, share drawings or entrance schedules where available. FourTeck can help match the accessory and identify related products, but final structural and electrical decisions should remain with qualified project professionals who understand the site and local regulations.
Africa Availability and Service Support
FourTeck supports product inquiries across Africa with assistance for model verification, quantity planning, accessory matching, quote requests, delivery coordination, and warranty guidance. Availability can vary according to the accessory model, supplier position, order quantity, destination, and requested schedule. Buyers should therefore request a current quotation rather than rely on an unconfirmed stock assumption.
For a single-door requirement, provide the compatible door-station model and delivery location. For a project order, include the number of entrances, rollout phases, preferred delivery timing, wall types, and any related Grandstream components. This helps the sales team prepare a more complete response and reduces separate follow-up requests for missing accessories.
FourTeck can also help resellers, contractors, property developers, facilities teams, and system integrators organise a bill of materials around the door-station installation. The final technical design, cutout, anchoring, wiring, weather treatment, and commissioning should be performed by suitably qualified professionals. Product guidance supports the buying process but does not replace site assessment or local building and electrical requirements.
Africa Country and Regional Coverage
Businesses across Africa, including Kenya, Uganda, Nigeria, Ghana, Tanzania, Rwanda, Ethiopia, South Africa, Zambia, Botswana, Senegal, and nearby regional markets can contact FourTeck for product availability, accessory matching, and quote assistance. Support can cover individual replacements, office fit-outs, residential developments, access-control upgrades, multi-door projects, and reseller requirements.
Delivery options, lead times, taxes, import arrangements, documentation, and warranty processes can differ by destination. Buyers should provide the exact delivery city, country, quantity, preferred timeline, and whether the requirement is for a new deployment or an existing installation. For project supply, include a door schedule or bill of materials so compatible devices, mounting accessories, network components, credentials, and protection items can be reviewed together.
Regional support is intended to make procurement clearer, not to replace local installation expertise. The final wall preparation, mounting method, cable separation, sealing, accessibility, and safety checks should follow the project specification and applicable local codes.
GCC, Middle East and Africa Availability
FourTeck Africa can support product inquiries for businesses across Africa while related FourTeck platforms can guide selected technology requirements in GCC and Middle East markets. Organisations operating in several countries may request coordinated assistance for model consistency, accessory selection, documentation, and phased procurement.
Requirements from Kenya, Uganda, Nigeria, Ghana, Tanzania, Rwanda, Ethiopia, South Africa, UAE, Saudi Arabia, Qatar, Oman, and Bahrain may involve different delivery routes, commercial terms, local compliance expectations, and warranty handling. Availability and supply arrangements remain dependent on the destination, chosen products, supplier status, order quantity, and project schedule.
Regional buyers can explore FourTeck Africa, FourTeck Kenya, FourTeck Uganda, and FourTeck UAE for the most relevant regional contact route. When requesting assistance, provide one consolidated list showing the required models, quantities, destinations, and target dates.
Other Options Buyers May Consider
A complete entrance normally combines the mounting accessory with the appropriate door station and supporting components. The options below help buyers build a more complete requirement. Final compatibility should be confirmed for the selected design.
Grandstream GDS3725
Suitable where a smart IP video door station with a numeric keypad is required. Confirm the complete access-control design and installation accessories.
Grandstream GDS3726
A compatible smart IP video door station with a single doorbell key for entrance communication and access-control projects.
GDS372X Rain Cover
Consider additional weather protection where the entrance is exposed. Check how the rain cover fits the chosen wall and mounting method.
Grandstream NFC Credentials
Projects using card or fob access should confirm credential type, enrolment process, quantity, security policy, and user-management method.
PoE Switches and Injectors
The compatible door station requires a suitable network and power design. Check PoE budget, cable distance, uplink capacity, and surge environment.
Project Buying Assistance
Use FourTeck’s contact route when the requirement includes several entrances, countries, accessories, or a phased rollout.
Related product selection should be based on the actual operational requirement. A keypad model may suit entrances where PIN entry is part of the policy, while a single-button model may suit visitor calling and controlled release. Credentials, PoE equipment, locks, sensors, and network components should be selected as part of one design rather than as unrelated purchases.
Why Buyers Choose FourTeck
FourTeck works with business technology buyers who need more than a model number. Access-control projects involve compatibility, quantities, delivery schedules, installation dependencies, and support expectations. A structured buying conversation can prevent the wrong mounting kit, missing credentials, an overlooked rain cover, insufficient PoE capacity, or a door station that does not match the user workflow.
Assistance confirming the accessory and compatible door-station model.
Support for individual units, project quantities, and phased requirements.
Guidance on related mounting, weather, credential, and network items.
Regional inquiry support based on destination and procurement needs.
Clarification of available product documentation and supply terms.
Support for contractors, resellers, property teams, SMBs, and enterprise buyers.
FourTeck does not replace the architect, engineer, electrician, installer, or security consultant responsible for the site. Instead, the team helps make the procurement stage clearer by reviewing the information needed for an accurate product request. Buyers receive the best assistance when they share exact models, quantities, delivery locations, target dates, and a description of the intended installation.
For multi-site projects, FourTeck can help organise a consolidated request so repeated items are easier to identify. This approach supports consistent purchasing and gives the customer a clearer record of which door stations, boxes, protection accessories, credentials, and network components are associated with each rollout phase.
Frequently Asked Questions
What is the Grandstream GDS372X mounting box used for?
It is a mechanical installation accessory that allows a compatible GDS3725 or GDS3726 smart IP video door station to be recessed into a wall. The box helps create a flush-mount finish and provides an organised housing area behind the device. It does not include the electronic door station or add camera, intercom, network, or access-control functions by itself.
Which Grandstream door stations are compatible?
Grandstream specifies the GDS372X flush-mounting box for the GDS3725 and GDS3726. Buyers should not assume it fits older or different GDS models, even when those products look similar. Confirm the exact model label before ordering, especially when the accessory is for a replacement or an existing site.
Can the box be installed in concrete or drywall?
Yes. The accessory supports solid wall, stud, and drywall or hollow-wall installation. The preparation method, fixings, reinforcement, dust control, sealing, and finishing will differ by wall type. A qualified installer should examine the site and follow the official documentation together with local building and electrical requirements.
Does the package include the GDS3725 or GDS3726?
No. The mounting box is an accessory and should be quoted separately from the smart IP video door station. A complete project may also require PoE equipment, Ethernet cabling, locks, exit buttons, door sensors, credentials, weather protection, configuration, and installation services. Check the quotation line by line to confirm the supply scope.
What are the mounting box dimensions?
The plastic in-wall box measures 130 x 250.3 x 41.5 mm and weighs 179 g. The zinc-alloy decorative cover measures 125.5 x 254.8 x 4.5 mm and weighs 254 g. Use official installation documentation and a physical fit check before making the final wall opening.
What installation height is recommended?
Grandstream suggests placing the bottom of the compatible door station approximately 50 to 52 inches above the ground. The final height should also consider accessibility, camera view, user approach, door hardware, architectural design, and local regulations. Review the entrance before fixing the box permanently.
Is this product available for delivery across Africa?
FourTeck supports inquiries from businesses across Africa. Current availability, delivery method, lead time, and commercial terms depend on destination, supplier status, quantity, and project schedule. Send the required model, quantity, delivery country, city, and target date to receive current quote assistance.
Can FourTeck help with a multi-door project?
Yes. Share a door schedule or bill of materials showing each entrance, compatible door-station model, wall type, quantity, related accessories, delivery location, and rollout phase. FourTeck can help review the purchasing list and coordinate a quote, while qualified project professionals remain responsible for design and installation.
What information should I provide for a quote?
Provide the accessory model, paired GDS3725 or GDS3726, quantity, delivery destination, requested timing, wall construction, and whether related products are required. For larger projects, include PoE, credential, lock, sensor, rain-protection, and installation needs so the request can be reviewed as a complete system rather than a single isolated item.
Need Help Planning a Flush-Mount Installation?
FourTeck can help you review model compatibility, project quantities, related accessories, availability, delivery requirements, and warranty guidance for your business location. Share the door-station model and project details for a clearer quotation.
Reviews
There are no reviews yet.