Grandstream GWN7700 Unmanaged Switch Series in Africa
Build dependable wired connectivity for workstations, IP phones, wireless access points, printers, cameras and everyday business devices with a practical family of plug-and-play Gigabit switches. The GWN7700 range gives buyers a choice of compact desktop units, PoE+ models and larger rack-mount switches, allowing each site to match port count and power delivery to the real deployment instead of overbuying complex management features that may not be required.
Request QuoteCheck Africa Availability
Quick Product Information
Grandstream
GWN7700(P & PA)
Unmanaged Gigabit Ethernet switches
5, 8, 16, 24 or 48 Gigabit ports
4 or 8 PoE+ output ports on selected models
SMBs, branches, retail, education, hospitality and project installers
Plug-and-play; no switch configuration required
Model and quantity dependent; request current options
Selection, PoE review, quote and delivery coordination
Guidance based on supplied model and sourcing channel
Product Overview
A growing office can run out of network ports long before it outgrows its internet service. New desktop computers, shared printers, voice phones, wireless access points, cameras, attendance systems and other endpoints all need a stable path into the local network. The Grandstream GWN7700 family addresses this basic but important requirement with unmanaged Ethernet switching that can be installed without creating VLAN profiles, management accounts or complex operating procedures.
The range is broad enough to suit very different environments. A five-port model can sit beside a router in a small office, reception desk or home workspace. Eight-port models can support a compact branch, meeting area, retail counter or small communications cabinet. Sixteen and twenty-four-port versions provide more room for departmental networks, surveillance expansion and organised rack deployments. The forty-eight-port GWN7706 is intended for higher-density access connectivity and includes two SFP fibre ports for suitable uplink designs. PoE-capable versions are available where the switch must carry both network data and electrical power to compatible endpoints.
Every copper port supports automatic negotiation for common 10/100/1000Mbps devices and auto MDI/MDIX, reducing concern about crossover cable selection. The family also includes traffic-handling functions such as flow control, priority handling and model-dependent IGMP behaviour. These functions operate without turning the switch into a fully managed platform, which keeps day-to-day deployment simple while improving suitability for mixed office traffic.
This product family is most relevant when the business needs reliable Layer 2 connectivity but does not require advanced administration such as user-defined VLANs, access control lists, link aggregation policies, remote switch monitoring or detailed per-port configuration. Selecting an unmanaged model for the correct workload can reduce purchase complexity and support effort. Selecting one where management is actually needed can create limitations later. FourTeck therefore helps buyers review not only the port count, but also the network design, endpoint types, PoE load, rack requirements, uplink plan and expected growth before a model is quoted.
For Africa buyers, this approach is particularly useful in branch rollouts, retail projects, education environments, hospitality sites and small business networks where equipment must be practical to install and easy for local teams to understand. FourTeck can coordinate product selection, related cabling and rack items, delivery requirements and warranty guidance as part of the purchase discussion.
Key Business Benefits
A network switch may appear to be a simple component, yet choosing the correct type affects device availability, cable organisation, power planning and the ability to expand. The GWN7700 series brings practical advantages to buyers who need dependable access connectivity without a management burden.
â—† Fast Gigabit Expansion
Adding ports is straightforward. Connect the switch to the existing router, firewall or upstream switch, then attach compatible endpoints. Gigabit access supports routine office data, cloud applications, printing, file access, voice systems and many camera deployments without the limits of older Fast Ethernet hardware.
â—† Simpler Deployment
Because the range is unmanaged, there is no configuration interface to learn and no policy file to maintain. This is valuable for small sites, temporary offices, replacement jobs and installations where local staff need a device that starts forwarding traffic after basic cabling is completed.
â—† Flexible Port Counts
The family scales from small desktop units to forty-eight-port rack hardware. Buyers can select capacity that reflects the number of active endpoints, spare ports, uplink use and planned additions instead of forcing one chassis size across every branch.
â—† Optional PoE+ Power
Selected P and PA models can power compatible devices through the same Ethernet cable used for data. This can reduce local power adapters at ceilings, walls and desks while making it easier to connect IP phones, access points and cameras where nearby electrical sockets are inconvenient.
â—† Automatic Compatibility
Auto-negotiation and auto MDI/MDIX help the switch work with common Ethernet devices and standard straight-through cabling. This lowers installation friction when older 10/100Mbps endpoints and newer Gigabit devices share the same access network.
â—† Practical Energy Use
The series uses green networking technology intended to reduce unnecessary power consumption. For businesses deploying multiple branch switches, small efficiency improvements can support lower operating overhead and simpler power planning over the equipment lifecycle.
â—† Clear Visual Status
Port and power LEDs provide quick confirmation of link activity and device operation. On relevant PoE models, visual indicators also help technicians confirm power delivery. This supports faster on-site checks without logging into software.
Product Highlights
The portfolio includes GWN7700, GWN7700P, GWN7701, GWN7701P, GWN7701PA, GWN7702, GWN7702P, GWN7703 and GWN7706, covering compact and rack-oriented requirements.
Copper ports operate at 10/100/1000Mbps with automatic negotiation, making the range suitable for mixed endpoint estates where not every connected device supports the same speed.
GWN7700P and GWN7701P provide four PoE+ outputs, while GWN7701PA and GWN7702P provide eight. Each active PoE port can deliver up to 30W within the total model power budget.
Smaller models support desktop or wall placement. Larger metal-enclosure units can be used on a desktop or mounted in a standard rack where structured cabling terminates.
The range includes model-dependent flow control, priority handling, address learning, jumbo frame support and multicast behaviour to improve practical operation without requiring user configuration.
The GWN7706 provides forty-eight Gigabit RJ45 ports plus two SFP fibre ports and a 100Gbps switching capacity, supporting denser access layers and fibre uplink planning.
The important point for buyers is that the series name does not represent one fixed specification. Port count, enclosure, mounting, PoE output, power budget, switching capacity and uplink design vary by model. A quote should therefore identify the exact model code and confirm whether the requirement is standard Ethernet only or Ethernet with endpoint power.
Technical Specifications
| Model | Gigabit Ports | PoE Ports / Budget | Enclosure / Mounting | Switching Capacity | Key Note |
|---|---|---|---|---|---|
| GWN7700 | 5 × RJ45 | None | Plastic; desktop/wall | 10Gbps | Compact non-PoE access |
| GWN7700P | 5 × RJ45 | 4 PoE+; 60W total | Metal; desktop/wall | 10Gbps | Up to 30W per powered port within budget |
| GWN7701 | 8 × RJ45 | None | Plastic; desktop/wall | 16Gbps | Compact eight-port access |
| GWN7701P | 8 × RJ45 | 4 PoE+; 60W total | Metal; desktop/wall | 16Gbps | Four powered and four standard ports |
| GWN7701PA | 8 × RJ45 | 8 PoE+; 145W total | Metal; desktop/rack | 16Gbps | Higher PoE budget with internal AC power |
| GWN7702 | 16 × RJ45 | None | Metal; desktop/rack | 32Gbps | Mid-density non-PoE switching |
| GWN7702P | 16 × RJ45 | 8 PoE+; 138W total | Metal; desktop/rack | 32Gbps | Eight powered ports plus eight standard ports |
| GWN7703 | 24 × RJ45 | None | Metal; desktop/rack | 48Gbps | Departmental or rack access expansion |
| GWN7706 | 48 × RJ45 + 2 × SFP | None | Metal; desktop/rack | 100Gbps | High-density copper access with fibre uplinks |
Shared technical characteristics
The series supports 10/100/1000Mbps Ethernet on RJ45 access ports, automatic negotiation, auto MDI/MDIX, MAC address learning and ageing, IEEE 802.3x flow control and model-dependent priority or multicast features. Jumbo frame support is 9KB on compact models, 10KB on the 16 and 24-port models, and 9KB on GWN7706. Typical environmental limits are 0°C to 40°C operating temperature for most models, while GWN7706 is rated up to 45°C. Final dimensions, weight, included power equipment and mounting accessories depend on the selected model.
The correct configuration begins with the endpoint list. Count every desktop, printer, phone, camera, wireless access point, controller, recorder, server connection and uplink. Then add spare capacity for moves, replacements and future additions. A five-port switch may provide only four usable endpoint ports after one uplink is connected. The same planning principle applies to every size. For PoE models, count watts as well as ports. A switch may have enough physical PoE interfaces but an insufficient total power budget for all connected devices at maximum load. Confirm each endpoint’s standard and expected draw before selecting GWN7700P, GWN7701P, GWN7701PA or GWN7702P.
Also decide whether unmanaged switching is genuinely suitable. Organisations needing separate staff and guest networks, per-port security, remote monitoring, link aggregation, spanning-tree control or advanced quality policies should consider a managed Grandstream GWN switch instead. FourTeck can help make this distinction before purchase, which reduces the risk of replacing a new switch because an operational requirement was discovered after deployment.
Configuration and Buyer Guidance
A successful switch purchase starts with a simple network map. Identify the upstream router or firewall, the number of wired endpoints, which devices require power, where cables terminate and whether the equipment will sit on a desk, attach to a wall or mount inside a rack. This prevents a common mistake: selecting only by advertised port count.
1. Count usable ports
Reserve one or more ports for uplinks, routers, firewalls, recorders or other infrastructure. Add spare capacity so a small office does not immediately require another switch when two new users arrive.
2. Calculate PoE load
Record the maximum wattage of every phone, camera and access point. Compare the total with the switch budget, not only the per-port maximum. Leave safe headroom for startup demand and future devices.
3. Review mounting
Compact models suit desks and walls. Larger units are easier to organise in a rack with patch panels, cable managers, power distribution and proper airflow. Confirm rack depth and available units.
4. Check management needs
Unmanaged switching is ideal for a flat network. Choose a managed alternative when the business needs VLANs, monitoring, access restrictions, redundant links or controlled traffic engineering.
5. Confirm cabling quality
Gigabit performance depends on suitable, correctly terminated copper cabling. Review patch leads, horizontal cable runs, patch panels and grounding in rack environments.
6. Plan power continuity
Place the switch and upstream network devices on suitable surge protection or UPS backup where service continuity matters. A PoE switch failure can interrupt several powered endpoints at once.
Before requesting a quote, share the preferred model if known, number of required units, destination country, endpoint list, PoE device models, rack or desktop preference and expected delivery timeframe. FourTeck can use this information to identify missing accessories and suggest a managed alternative when the requirement exceeds the intended role of an unmanaged switch.
Ideal Business Use Cases
Small Offices and Branches
Connect desktop users, printers, an IP phone system and a local access point without introducing management overhead. The compact five or eight-port models are easy to position close to the router or inside a small wall cabinet.
Retail and Point-of-Sale Areas
Provide wired links for tills, receipt printers, payment terminals, back-office computers, digital signage and cameras. PoE-capable models can reduce local adapters where compatible devices are used.
IP Telephony Deployments
Power and connect selected numbers of compatible IP phones through the PoE+ variants. Buyers should calculate the total phone load and reserve capacity for conferencing units or expansion.
Wireless Access Point Expansion
Use a PoE model to supply data and power to compatible ceiling or wall-mounted access points. This is useful where electrical sockets are not positioned near the installation point.
Surveillance Networks
Connect IP cameras, an NVR and viewing stations in small or medium installations. Confirm camera wattage, total PoE budget, recording bandwidth and whether a managed switch is preferred for larger security networks.
Schools and Training Rooms
Add ports for classroom computers, printers, displays and wireless equipment. The sixteen or twenty-four-port models can support structured cabling within a lab or departmental rack.
Hospitality and Guest Facilities
Support back-office devices, reception systems, IP phones, cameras and access points in small hotels, guest houses and restaurants. Managed switching should be considered where guest and staff traffic must be separated.
Temporary and Project Sites
Quickly extend connectivity in site offices, events, pop-up operations and temporary work areas. The plug-and-play design reduces setup time when advanced network segmentation is not part of the requirement.
The range is not intended to replace a managed access layer in every environment. Larger businesses, regulated networks and multi-tenant sites may require port authentication, VLAN control, redundancy and monitoring. FourTeck can compare the requirement with Grandstream managed switch families and recommend a more suitable platform where needed.
Grandstream GWN7700 Series Plug-and-Play Gigabit Connectivity
The central advantage of this family is operational simplicity. In a typical small deployment, the installer powers the switch, connects an uplink to the router or firewall and attaches Ethernet endpoints. The switch learns device addresses and forwards traffic automatically. There is no administrative interface to secure, no configuration backup to store and no controller dependency for basic operation.
That simplicity creates real business value when the network requirement is uncomplicated. A branch can replace a failed basic switch without waiting for a specialist to reproduce a configuration. A project team can add temporary desks quickly. A retailer can extend ports behind a counter. A school can connect classroom systems with minimal administration. The automatic negotiation feature also supports mixed estates, allowing older equipment to link at its supported speed while newer devices use Gigabit access.
However, plug-and-play should not be interpreted as planning-free. The physical network still needs correct cabling, appropriate uplink capacity, secure upstream routing, suitable power protection and sensible placement. An unmanaged switch forwards the network it is given; it does not create security boundaries or enforce business policy. Buyers should ensure that the router or firewall handles internet protection and that any required network separation is provided elsewhere.
For organisations standardising small branches, the range can simplify procurement because several port counts share a similar operating concept. Local teams do not need separate switch administration training for each site. FourTeck can help define a small-site standard, such as a compact non-PoE model for desk expansion, an eight-port PoE+ model for phones and access points, and a rack unit for larger offices. This turns a collection of individual purchases into a more consistent deployment approach.
Grandstream GWN7700 Series PoE+ Power Delivery
Power over Ethernet can simplify endpoint installation by carrying electricity and data through one network cable. This is especially useful for IP phones placed on desks, cameras mounted away from sockets and access points installed on ceilings or high walls. The GWN7700P, GWN7701P, GWN7701PA and GWN7702P provide IEEE 802.3af/at-compatible PoE output for suitable devices.
The compact GWN7700P and GWN7701P each provide four powered ports with a 60W total budget. The GWN7701PA powers all eight access ports and offers a 145W total budget. The GWN7702P provides eight powered ports within a 138W total budget while retaining eight non-PoE Gigabit ports. Each powered port can supply up to 30W, but the overall budget remains the deciding limit. For example, eight devices rated near 25W would exceed a 145W budget even though each individual port supports up to 30W.
A proper PoE plan records the maximum draw of each endpoint, not only its typical consumption. Some devices draw more power during boot, radio activity, infrared illumination or accessory use. Buyers should also allow margin for future devices and avoid designing the switch at its absolute maximum from the first day. When the required load is high, a larger managed PoE switch or a different power architecture may be more appropriate.
Cable quality matters because PoE adds electrical load to the same conductors used for data. Use suitable copper cabling, correct termination and organised patching. Long runs, damaged connectors and poor-quality cable can create voltage drop, heat or unstable links. FourTeck can review endpoint model numbers, quantities, cable distances and rack requirements before recommending a PoE variant. This helps buyers avoid purchasing enough ports but not enough power, one of the most common mistakes in switch selection.
Grandstream GWN7700 Series Port Density and Deployment Flexibility
Port density influences equipment placement, cable routing and future expansion. The smaller models work well at the network edge where only a handful of devices need connection. Their desktop and wall-mount options help installers place them near users, phones, cameras or access points. The larger metal units suit structured cabling environments where several room outlets return to a central rack.
The five-port units are best understood as four-endpoint expansion devices in many layouts because one port is normally consumed by the uplink. The eight-port family provides more flexibility for small branches and mixed endpoint groups. Sixteen and twenty-four-port units are useful when the buyer wants cleaner centralisation rather than several small switches distributed around a room. Centralising connections can simplify troubleshooting, power backup and cable labelling.
At the top of the range, the GWN7706 combines forty-eight copper access ports with two SFP fibre interfaces. This supports higher-density access and allows compatible fibre modules to connect an upstream switch or longer-distance network segment. The design still remains unmanaged, so buyers gain port scale without advanced configuration. Where high density also requires VLANs, redundant uplinks or monitoring, a managed model should be specified instead.
Physical planning should include rack width, depth, ventilation, power socket type, patch-panel position and cable management. A switch installed neatly with labelled patch leads is easier to support than the same hardware placed loosely among power adapters and unmarked cables. For desktop installations, keep the unit away from moisture, direct heat and areas where cables can be pulled. For wall mounting, verify orientation and adapter placement. FourTeck can help match the model to the site layout and include related rack, patching, fibre or power items in the quote discussion.
What Buyers Should Check Before Purchase
A model name alone is not enough to produce an accurate switch quote. Buyers should review how the switch will be used, what connects to it and what the network may need during the next few years. The checklist below helps prevent wrong port counts, insufficient PoE power, missing rack accessories and unexpected management limitations.
Correct Model Selection
Specify the exact number of copper endpoints, uplinks and spare ports. Decide whether the site needs five, eight, sixteen, twenty-four or forty-eight access ports and whether fibre uplinks are part of the design.
PoE Requirement
List each powered endpoint and its maximum wattage. Confirm both the number of PoE interfaces and the total budget. Include future phones, cameras or access points rather than sizing only for today’s devices.
Compatibility Check
Verify Ethernet speed, PoE standard, cable type and connector condition. Confirm that SFP modules planned for GWN7706 are suitable for the fibre type, distance and upstream equipment.
Management Expectations
An unmanaged model does not provide user-defined VLANs, per-port access control or central monitoring. Share these requirements early so FourTeck can recommend a managed Grandstream switch where appropriate.
Rack and Environment
Confirm rack space, power, ventilation, grounding and cable management. Smaller devices may use external adapters, while selected rack units use internal AC power and include mounting brackets.
Availability and Warranty
Availability can vary by model, quantity and sourcing channel. Ask for current lead time, supplied accessories and warranty guidance before confirming the order.
Long-Term Cost
Consider power protection, replacement adapters, fibre modules, patch cords, rack hardware and future expansion. A slightly larger model may cost less over time than adding several small switches later.
Quote Preparation
Provide destination, quantity, preferred model, endpoint count, PoE load, mounting method and target deployment date. For project supply, include branch quantities and whether the same standard is required across all sites.
FourTeck can use these details to compare similar models, identify required accessories and explain when an alternative switch is a better fit. The goal is to select equipment that supports the business requirement rather than choosing only by the lowest initial cost or the largest advertised port number.
Africa Availability and Service Support
FourTeck supports enquiries for the GWN7700 switch family across Africa with assistance that begins before the quote. Buyers can share the number of users, connected devices, PoE requirements, preferred mounting, branch locations and planned delivery schedule. The team can then review the suitable model, clarify configuration differences and identify related accessories such as patch leads, racks, fibre modules, UPS units or cabling materials.
Availability may vary according to the selected model, supplier status, order quantity and delivery destination. Compact non-PoE models, PoE versions and higher-density rack units may not follow the same lead time. FourTeck therefore confirms current options during the enquiry process rather than presenting an unverified stock statement. Project buyers can also request guidance for staged delivery, multiple branches or a consistent bill of materials.
Warranty handling depends on the supplied unit and sourcing channel. FourTeck can explain available warranty guidance and the information that should be retained, including invoice details, model code and serial number. For technical planning, the team can help review whether the proposed unmanaged switch is suitable or whether a managed Grandstream model would better support VLANs, monitoring or advanced network control.
Africa Country and Regional Coverage
Businesses across Africa, including Kenya, Uganda, Nigeria, Ghana, Tanzania, Rwanda, Ethiopia, South Africa, Zambia, Botswana, Senegal and nearby regional markets, can contact FourTeck for product availability, model guidance and project quote support. Requests may range from one compact switch for a small office to multiple units for branches, schools, retail locations, hotels, clinics, warehouses or public-sector facilities.
Regional supply planning should consider more than the destination address. Power plugs, rack standards, fibre types, site readiness, delivery schedules and the ability of local installers to support the equipment can affect the final bill of materials. FourTeck can coordinate these questions with the buyer before the order, helping ensure that the selected switch arrives with the correct supporting components.
For multi-country projects, it is useful to standardise a small number of approved models. A compact non-PoE model may serve ordinary desks and printers, a PoE+ model may serve phones and access points, and a rack model may serve larger branches. Standardisation can simplify spare holding, documentation and technician familiarity. Buyers can use the FourTeck Africa contact page to submit quantities and site requirements for review.
GCC, Middle East and Africa Availability
FourTeck Africa can support business enquiries across the African market while also guiding regional requirements through selected FourTeck platforms serving GCC and Middle East buyers. Organisations with offices in the UAE, Saudi Arabia, Qatar, Oman, Bahrain or African markets may need similar equipment standards but different delivery arrangements, plug formats, warranty channels or project schedules.
Availability and delivery options depend on country, selected model, quantity and current supplier status. A regional project should identify each destination, required port count, PoE load, mounting method and target installation date. FourTeck can help compare whether the same GWN7700 model is appropriate at every location or whether site size requires a mix of compact, PoE and rack switches.
For broader regional assistance, buyers can review FourTeck Africa, FourTeck Kenya, FourTeck Uganda and FourTeck UAE. The suitable platform and supply route can be confirmed during the enquiry.
Other Options Buyers May Consider
An unmanaged GWN7700 model is a strong fit for simple access expansion, but some networks need central administration, stronger segmentation or different uplink speeds. The options below help buyers identify related product directions. Final model suitability depends on the required port count, power, management and network design.
Grandstream GWN7800 Managed Switches
Suitable when the business needs VLANs, central management, advanced traffic control and more detailed network administration.
Grandstream GWN7711 Series
A Layer 2 Lite direction for buyers who want cloud-manageable networking without moving immediately to a full enterprise feature set.
Grandstream GWN Access Points
Compatible wireless infrastructure for offices, shops, schools and hospitality environments, with model choice based on coverage and client load.
Grandstream IP Phones
Business voice endpoints that can be connected through suitable PoE switch models, subject to phone power requirements and network design.
Network Racks and Cabling
Patch panels, cabinets, cable managers, copper patch cords and fibre accessories support a clean and serviceable installation.
UPS and Power Protection
Suitable backup power can keep switches, routers and PoE endpoints operating during short interruptions and protect against unstable mains conditions.
Why Buyers Choose FourTeck
Technology procurement is more dependable when the supplier understands how products fit together. A switch affects phones, cameras, wireless access points, routers, firewalls, servers, recorders, cabling and power protection. FourTeck approaches the enquiry as part of the wider infrastructure rather than treating the model code as an isolated item.
Assistance for individual purchases, branch rollouts, replacement jobs and project quantities.
Review of port count, PoE budget, uplink design, mounting and management requirements.
Clear model identification and related-item planning help produce a more complete procurement request.
Support for destination details, quantities, project schedules and regional supply discussions.
Information based on the supplied product and sourcing channel, without unsupported promises.
Guidance toward managed switches or related infrastructure when the original model is not the right fit.
This support is useful for SMB buyers who do not have a full-time network architect and for enterprise procurement teams that need accurate model matching across multiple locations. FourTeck can also help identify the information required from installers, such as cable schedules, endpoint power ratings and rack layouts, so purchasing decisions are based on the deployment rather than assumptions.
Frequently Asked Questions
What is the GWN7700 switch family used for?
It is used to expand wired Gigabit connectivity for computers, printers, IP phones, cameras, wireless access points and other Ethernet devices. The switches operate without user configuration, making them suitable for straightforward office, retail, education, hospitality and branch networks that do not require advanced managed-switch controls.
Which models provide PoE+ output?
GWN7700P and GWN7701P provide four PoE+ ports with a 60W total budget. GWN7701PA provides eight PoE+ ports with a 145W budget, while GWN7702P provides eight PoE+ ports with a 138W budget. Endpoint wattage should be checked before choosing a model.
Is the series suitable for VLANs and remote management?
No user configuration is provided because these are unmanaged switches. Businesses needing VLAN creation, remote monitoring, port security, link aggregation or advanced traffic policies should consider a managed Grandstream GWN switch. FourTeck can help compare the requirement and suggest an appropriate managed alternative.
How do I choose the correct port count?
Count all connected devices, reserve ports for uplinks and infrastructure, then add spare capacity for growth. Remember that a five-port switch often supports only four local endpoints after one uplink is used. Larger branches may benefit from one central sixteen or twenty-four-port unit instead of several small switches.
Can FourTeck help calculate the PoE budget?
Yes. Share the model and quantity of each IP phone, camera or access point. FourTeck can compare the combined maximum load with the switch’s total budget and check whether there is enough margin for startup demand and future devices.
Is the GWN7700 family available across Africa?
FourTeck supports enquiries across Africa. Availability can vary by exact model, quantity, supplier status and delivery destination. Contact the team with your preferred model and location so current options, lead time and delivery coordination can be reviewed before order confirmation.
Do rack-mount models include mounting accessories?
The larger rack-oriented models are supplied with model-dependent mounting items such as standard brackets and rubber feet. Package contents should still be confirmed in the quote, particularly for project orders where rack installation and cable management accessories are also required.
Can the switches connect older 10/100Mbps devices?
Yes. The RJ45 ports support automatic negotiation for 10, 100 and 1000Mbps Ethernet devices. The switch detects the available link speed and operates accordingly. Actual performance still depends on the endpoint, cabling, upstream connection and overall network traffic.
What information should I send for a business quote?
Provide destination country, required quantity, expected port count, PoE device list, preferred mounting style, fibre uplink requirement and target deployment date. For multiple branches, include quantities per site and whether one standard model should be used everywhere.
Can businesses request bulk or project supply?
Yes. Businesses, resellers, system integrators and project teams can request multiple units or mixed models. FourTeck can review branch schedules, related racks and cabling, PoE endpoint requirements and delivery coordination to support a more complete project quotation.
Need Help Choosing the Right GWN7700 Model?
FourTeck can review port capacity, PoE power, rack placement, cabling, fibre uplinks, current availability and delivery requirements for your business location. Send the endpoint list and quantity to receive practical model guidance and a tailored quote.