Grandstream GWN7700P Unmanaged PoE Switch in Africa
Give a small office, reception desk, shop, clinic, classroom or branch location a clean wired network connection while powering up to four compatible endpoints from the same compact switch. This five-port Gigabit model is designed for buyers who value quick deployment, predictable operation and a practical 60 W PoE budget without the administration overhead of a managed switch.
✓ 60 W PoE budget
✓ Plug-and-play setup
✓ Desktop or wall mounting
Check Africa Availability
Availability and warranty terms depend on the confirmed supply option.
Quick Product Information
Grandstream
GWN7700P
Five-port unmanaged Gigabit PoE switch
Four IEEE 802.3af/at ports, up to 30 W per port
60 W across powered ports
Small PoE edge deployments with no VLAN or switch-management requirement
Desktop or wall mount
Model selection, PoE calculations, quote support, delivery coordination and warranty guidance
Product Overview
Small network installations often need more than basic Ethernet connectivity. An IP telephone requires both data and power. A security camera may be mounted where a separate electrical socket is inconvenient. A ceiling access point needs a clean cable path without a local adapter. A door station, paging endpoint or compact controller may also depend on Power over Ethernet. The switch at the centre of this environment must therefore carry traffic reliably while allocating enough electrical power to the connected devices.
This model answers that requirement in a compact metal enclosure. Five RJ45 ports provide 10/100/1000 Mbps connectivity, and ports one through four can supply IEEE 802.3af or IEEE 802.3at power. The fifth port is normally used as the network uplink to a router, firewall or larger distribution switch, although the physical ports can carry standard Ethernet traffic according to the final cabling design. The 60 W shared power budget is suitable for a carefully planned group of low-to-moderate power endpoints. Each powered port can provide up to 30 W, but the total draw of all devices must remain within the overall budget.
Because the switch is unmanaged, there is no web interface to configure and no ongoing switch policy to maintain. Auto-negotiation identifies the supported link rate of a connected device, while Auto MDI/MDIX removes the old concern about straight-through versus crossover Ethernet cables. The result is a straightforward deployment approach: connect the uplink, connect compatible endpoints, apply power and verify the link and device indicators. This simplicity is valuable in small offices, satellite locations, shop counters, reception areas and dedicated device clusters where advanced segmentation is already handled elsewhere or is not required.
The product is not a substitute for a managed access switch when the project needs VLAN assignment, spanning-tree controls, link aggregation, detailed monitoring, port security policies or remote switch administration. It is best viewed as a focused edge device for uncomplicated connectivity. FourTeck helps buyers review the device count, power demand, network topology, cabling distance and growth plan before purchase. That review can prevent common errors such as choosing too little PoE capacity, using an unmanaged design where segmentation is essential, or leaving no spare port for expansion.
Key Business Benefits
The value of a small PoE switch is measured by how effectively it reduces installation effort, keeps essential devices connected and matches the actual site requirement. The following benefits translate its technical design into practical outcomes for business buyers.
◆ One Cable for Data and Power
PoE can carry network traffic and electrical power over the same Ethernet run. This helps installers position phones, cameras and access points according to operational need rather than the nearest wall socket. It can also reduce adapter clutter around desks, counters and ceilings.
◆ Fast, Low-Complexity Deployment
An unmanaged design removes switch configuration from the initial rollout. For simple networks, this saves deployment time and reduces the risk of incorrect VLAN, trunk or access-port settings. Staff can focus on correct cabling, endpoint setup and power-budget validation.
◆ Controlled PoE Spending
A 60 W shared budget fits many small four-device installations without moving to a larger chassis. Buyers pay for a compact capability aligned with the project, while still gaining support for IEEE 802.3af and 802.3at endpoints and up to 30 W on an individual powered port.
◆ Gigabit Access for Modern Endpoints
Each port supports 10, 100 and 1000 Mbps Ethernet. Gigabit access helps avoid an unnecessary local bottleneck for newer cameras, phones, wireless access points and workstations, provided the uplink and wider network are also designed for the expected traffic.
◆ Flexible Physical Placement
The compact metal unit can sit on a desk, shelf or equipment surface, or be wall-mounted when the installation requires a tidier footprint. This flexibility is useful in reception cabinets, retail back rooms, classrooms and small communication spaces with limited rack capacity.
◆ Automatic Link Compatibility
Auto-negotiation and Auto MDI/MDIX make mixed endpoint connections easier. The switch can work with 10, 100 or 1000 Mbps network devices and does not require special crossover cable selection, reducing avoidable setup mistakes during small deployments.
◆ Better Fit for Focused Edge Networks
A small device cluster does not always need a large managed platform. This switch can serve a defined group of endpoints close to the work area, simplifying cable organisation while allowing the main router, firewall or core switch to remain the central point of policy and internet control.
Product Highlights
The switch combines a deliberately simple operating model with several useful capabilities normally expected from a business-grade access device. The five Gigabit copper ports provide enough connectivity for a small endpoint cluster and its uplink. Four ports can automatically detect compatible powered devices and allocate power within the available budget. When total demand becomes too high, the design protects the power budget by removing power from the lowest-priority powered port according to the stated port priority sequence.
The internal switching capability supports full-duplex Gigabit traffic across the compact five-port design.
Jumbo-frame support can reduce overhead in compatible local environments, although every device in the path should be checked before relying on larger frame sizes.
IEEE 802.3x flow control, priority handling and IGMP-related functions support orderly forwarding in common small-network conditions.
Per-port link and activity indicators plus a device power indicator make basic installation checks easier for technicians and local support teams.
The base system consumes approximately 2 W excluding power supplied to endpoints. Actual electrical use depends on the attached devices and their negotiated PoE demand. The external power adapter is part of the specified package, together with the switch and quick installation guide. Environmental planning remains important: the operating range is 0 to 40 °C with non-condensing humidity, so the device should be installed in a ventilated indoor location away from excessive heat, moisture, dust and unstable power.
Technical Specifications
| Specification | Details |
|---|---|
| Brand / Model | Grandstream GWN7700P |
| Switch Type | Unmanaged Gigabit Ethernet PoE switch |
| Copper Ports | 5 × 10/100/1000 Mbps RJ45, auto-negotiation, Auto MDI/MDIX |
| PoE Ports | Ports 1–4 support IEEE 802.3af and IEEE 802.3at |
| PoE Output | Up to 30 W on an individual powered port; 60 W total shared power budget |
| PoE Priority Behaviour | Overload protection can cut power to the lowest-priority port; priority is stated from port 4 toward port 1 |
| Switching Capacity | 10 Gbps |
| MAC Address Table | 2K entries |
| Jumbo Frame | 9 KB |
| Protocols and Standards | IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.1p, 802.3af and 802.3at |
| Traffic Features | MAC auto-learning and auto-aging, IEEE 802.3x flow control, 802.1p/DSCP priority handling, IGMP Fast-Leave, IGMP Snooping, route-port auto-learning and query refresh member-port functions |
| Indicators | Per-port link/activity green LED and device power green LED |
| Power Adapter | External 48–53.5 VDC / 1.22 A |
| Base-System Consumption | Approximately 2 W excluding PoE output power |
| Enclosure and Mounting | Metal enclosure; desktop or wall mounting |
| Dimensions / Weight | 145 × 80 × 27 mm; unit weight approximately 0.26 kg |
| Operating Environment | 0 to 40 °C; 10% to 90% non-condensing humidity |
| Package | Switch, external power adapter and quick installation guide |
| Compliance | FCC, CE, RCM, IC and UKCA |
| Warranty / Availability | Confirm applicable warranty terms, supplier availability and regional handling with FourTeck before ordering |
How to Read the Specification
Five ports do not mean five powered devices plus an uplink. Four ports provide PoE, while the total physical port count is five. A typical design uses one port to connect toward the router, firewall or main LAN and the remaining four for local endpoints. Buyers should therefore count both powered devices and the required uplink when checking capacity.
The 60 W power figure is shared. Four devices rated at 15 W each may fit on paper, but prudent planning should consider startup demand, cable quality, environmental conditions and future replacement devices. A single 30 W endpoint also reduces the remaining budget for the other ports. FourTeck can review each endpoint model or its stated power class before confirming the switch.
Configuration and Buyer Guidance
A compact unmanaged switch is easy to connect, but correct selection still depends on the network design. Begin by listing every endpoint. Record whether each device needs data only or data plus PoE, its maximum power draw, its link speed and the location where it will be installed. A four-camera installation may appear to fit perfectly, yet it still needs an uplink and may exceed the total power budget if the cameras have heaters, powerful infrared illumination, motorised lenses or other high-draw functions.
1. Count Ports Properly
Include the uplink in the total. Confirm how many local devices need to connect today and whether one spare port is necessary for service or growth.
2. Add the PoE Load
Use endpoint datasheets, not assumptions. Compare the combined maximum demand with the 60 W shared budget and allow sensible headroom.
3. Decide on Management
Choose unmanaged operation only when you do not need per-port VLAN settings, trunks, remote monitoring, access controls, aggregation or advanced troubleshooting.
4. Review Power Protection
Consider a suitable UPS or surge-protection approach for the switch, router and connected services, especially where phones, cameras or access points support critical operations.
The network upstream also matters. If several high-resolution cameras send continuous video through a single Gigabit uplink, calculate the combined bit rate and retention design. If an access point serves many users, confirm that the wired uplink and internet connection can support the expected traffic. If IP phones carry business calls, review router quality of service, WAN stability and power backup. The switch can forward traffic, but it cannot correct a weak internet service, poor cable termination or an undersized router.
Finally, check installation conditions. Use correctly terminated Category 5e or better cabling appropriate to the required speed and environment. Keep the unit ventilated and indoors. Plan the wall position so cable bend radius, adapter placement and maintenance access remain practical. Confirm the local power input and any required plug adaptation. Buyers preparing a quote request should share the endpoint list, site location, cable distances, required quantity, installation deadline and whether a larger or managed alternative may be considered.
Ideal Business Use Cases
This switch works best where a small, clearly defined group of Ethernet devices needs uncomplicated connectivity and limited PoE power. It can be deployed as an edge extension to a larger network or as the central wired switch in a very small site. The key is to match the port count, power budget and unmanaged operation to the business requirement.
IP Phones and Reception Desks
A reception area may need several PoE phones, a small computer or printer connection and an uplink to the office network. Centralising the powered endpoints can reduce desk adapters and make it easier to keep communications online through a UPS-backed network cabinet.
Small Surveillance Clusters
A shop, small warehouse zone or branch entrance may use up to four compatible PoE cameras connected back to an NVR or wider LAN. Camera power draw, recording bit rate, cable length and night-mode demand should be checked before confirming suitability.
Wireless Access Point Extensions
A small office can power one or more compatible access points and still connect local wired equipment. The wireless design should consider client count, coverage, roaming and uplink capacity; the switch itself does not manage radio settings or wireless security.
Retail and Point-of-Service Areas
A counter or back-office corner may need an IP phone, camera, access point, terminal or printer. A compact wall-mounted switch keeps these connections together. Payment security and network separation must still be handled by the correct router, firewall or managed infrastructure.
Classrooms, Training Rooms and Clinics
Focused spaces can use the switch for a small set of communication, wireless or monitoring endpoints. The compact form factor is useful where no full rack is available, provided the installation remains ventilated, secure and accessible for support.
Branch and Remote Office Edge
A remote branch may need a simple access layer for a few essential endpoints. The switch can sit behind an appropriately secured router or firewall, while central policies, VPN connectivity and internet protection remain the responsibility of the upstream platform.
Situations that demand more ports, higher PoE capacity, fibre uplinks, redundant links, traffic segmentation or central switch monitoring should move to a larger or managed model. FourTeck can help distinguish between a neat small-site deployment and a project that would be constrained by an unmanaged five-port design.
Grandstream GWN7700P PoE Power Planning
PoE is the feature that most directly affects whether this switch will succeed in a real installation. IEEE 802.3af and 802.3at define recognised methods for a power-sourcing device to detect and power a compatible endpoint. This is safer and more predictable than applying voltage without device negotiation. It also allows a network cable to serve endpoints located on ceilings, walls, reception counters and other positions where separate adapters are inconvenient.
The important buyer distinction is between per-port capability and total available power. A port can provide up to 30 W, but the switch does not have 30 W multiplied by four available at the same time. Its shared budget is 60 W. For example, two devices drawing close to 25 W each leave only a modest amount for the remaining powered ports. Four devices drawing 12 W each are easier to accommodate, but installers should still allow headroom rather than designing to the exact arithmetic limit.
Endpoint specifications can be expressed as a maximum input, a typical draw or a PoE class. Use the maximum relevant value for planning, especially for cameras whose infrared illumination, heating or motorised functions can raise demand after dark. Access points may also draw more under heavy radio activity or when additional functions are enabled. IP phones with expansion modules or USB accessories can differ from the base handset figure. When the model number is available, FourTeck can help compare the stated power requirement against the switch budget.
The overload behaviour is another planning factor. When total demand exceeds the available budget, the switch can remove power from the lowest-priority port. That protection helps the unit remain within its design limit, but it can interrupt the device connected to that port. Critical endpoints should therefore be assigned with the stated port priority in mind, and the overall design should avoid routinely operating near overload. A larger PoE switch or a dedicated injector may be the better choice when power demand is uncertain or likely to grow.
Grandstream GWN7700P Plug-and-Play Gigabit Connectivity
An unmanaged switch is designed to forward Ethernet traffic without a configuration workflow. This is valuable when the network is simple, the local team needs quick installation and advanced port policies are not required. Connect the switch to a suitable upstream network, attach the endpoints, apply power and confirm the LEDs. Auto-negotiation allows each port to recognise whether the connected device supports 10, 100 or 1000 Mbps operation. Auto MDI/MDIX automatically handles transmit and receive pair orientation, removing the need to select a crossover cable.
Simplicity, however, should not be confused with complete network control. The unit does not offer an administrator portal for assigning ports to VLANs, creating trunks, viewing detailed counters, disabling unused interfaces, aggregating links or applying access-control policies. If the upstream network already carries multiple VLANs, an unmanaged extension may not provide the port-level separation the project requires. The correct managed switch should be chosen whenever device groups must be isolated for security, performance or compliance.
The 10 Gbps switching capacity aligns with five Gigabit ports operating in full-duplex conditions. The 2K MAC table is suitable for the small edge environments targeted by the model, while 9 KB jumbo-frame support can be useful in compatible local networks. Flow control can help manage temporary congestion by signalling a transmitting device to pause, but it does not increase the available uplink bandwidth. A design carrying several cameras, a busy access point and local workstations should still calculate expected traffic.
For businesses, the benefit is predictable deployment effort. There is no switch software to license, no initial policy file to build and no management account to maintain. The trade-off is limited visibility and control. FourTeck can help buyers decide whether this trade-off is appropriate for a reception area, camera cluster, small branch or temporary expansion, or whether a managed Grandstream model will deliver better long-term control.
Grandstream GWN7700P Physical Deployment and Reliability
Network reliability begins with more than the switch specification. The device should be installed where airflow is not blocked and where the external power adapter can be secured without placing strain on the connector. The stated operating range is 0 to 40 °C and the environment must remain non-condensing. A closed cabinet exposed to direct sun, roof heat or poor ventilation can exceed safe conditions even when the surrounding room feels acceptable.
The metal enclosure is appropriate for a compact business installation and supports desktop or wall placement. Wall mounting can keep the unit away from work surfaces and reduce cable clutter, but installers should allow room for Ethernet plugs, cable bend radius and adapter routing. Avoid mounting where cleaning water, dust, vibration or accidental impact may affect the unit. Label the uplink and powered-device cables so local support staff can identify connections without trial and error.
Cabling quality has a direct influence on both data and PoE. Poor copper quality, excessive length, damaged conductors, mixed termination standards and loosely crimped connectors can create intermittent links or voltage loss. Use compliant cable for the site environment and test the run after termination. Outdoor routes, lift shafts, industrial areas and electrically noisy spaces may require a different cabling or surge-protection approach than a normal indoor office.
Power continuity should be considered at system level. Backing up only the switch does not preserve service if the router, firewall, NVR, internet terminal or upstream switch loses power. A small UPS can be planned around the combined load of all critical network devices and the desired runtime. FourTeck can help buyers identify the complete powered chain, review suitable protection and coordinate the switch with access points, cameras, phones and other network infrastructure.
What Buyers Should Check Before Purchase
A model name alone does not confirm that a switch is suitable. Before requesting a quote, buyers should describe the complete requirement so the selected device matches the site rather than only the initial price point. The most useful starting information is the number of Ethernet devices, the number requiring PoE, each endpoint model, the expected network traffic, the required uplink and any need for VLANs or remote management.
Configuration Fit
Confirm that four powered ports and one shared uplink arrangement cover the complete deployment. Include spare capacity, not just current endpoints.
Compatibility Check
Verify IEEE 802.3af/at support, endpoint power draw, Ethernet speed and cable quality. Passive PoE equipment needs separate review.
Availability and Warranty
Ask for current supplier availability, lead time, applicable warranty terms, regional handling and the exact contents of the quoted package.
Quote Preparation
Share quantity, destination, project schedule, endpoint list, installation environment and whether alternatives can be considered.
Buyers should also ask whether the network may grow beyond four powered devices. Replacing a small switch shortly after installation can cost more than selecting the right capacity at the beginning. A larger unmanaged model may be sufficient when only port count and PoE budget are increasing. A managed model becomes more appropriate when the business needs VLANs, port monitoring, loop controls, traffic policies, remote administration or more structured troubleshooting.
Required accessories are easily overlooked. The project may need patch leads, structured cabling, wall fixings, a small cabinet, surge protection, a UPS, cable labels or a suitable plug arrangement. Endpoint mounting hardware is normally separate from the switch. Confirm whether installation, testing and configuration services are part of the request or whether the order covers equipment supply only.
Long-term operating cost includes more than device price. Consider power continuity, replacement time, cable maintenance and the business impact of losing several connected endpoints at once. A clear quote request allows FourTeck to recommend the compact switch when it genuinely fits, or propose a higher-capacity or managed alternative when that better protects the project.
Africa Availability and Service Support
FourTeck supports product inquiries across Africa with practical assistance before an order is placed. The team can review whether the port count, PoE budget, unmanaged operation and physical format match the proposed installation. This is particularly useful when the buyer is combining IP phones, wireless access points, cameras, intercoms or other devices with different power requirements.
Availability may vary according to supplier status, order quantity, destination, project timing and the exact model requested. FourTeck does not require buyers to assume that a product is locally held or immediately dispatchable. Instead, the quote process can confirm the current supply route, expected lead time, applicable delivery arrangement and any alternative model worth considering.
Support can also include cabling guidance, PoE load review, compatible network accessories, UPS planning and warranty guidance. Warranty terms should be confirmed on the final quotation because regional handling can depend on the source and supply channel. For project orders, share the complete bill of materials and deployment schedule so related switches, access points, phones, cameras and accessories can be reviewed together.
Africa Country and Regional Coverage
Businesses in Kenya, Uganda, Nigeria, Ghana, Tanzania, Rwanda, Ethiopia, South Africa, Zambia, Botswana, Senegal and other regional markets can contact FourTeck for product selection, availability review and quote assistance. Requirements differ by destination, so the team can consider delivery coordination, project quantity, power conditions, installation environment and the buyer’s preferred support approach before confirming an offer.
A regional inquiry is more effective when it includes the delivery country, nearest commercial destination, required quantity, endpoint list and project deadline. Buyers with multi-site rollouts should also state whether every branch uses the same network design. FourTeck can then help determine whether one compact model suits all sites or whether larger branches need a different switch, stronger PoE budget or managed capabilities.
GCC, Middle East and Africa Availability
FourTeck Africa can support product inquiries for organisations operating across Africa while guiding related requirements through selected FourTeck regional platforms for the GCC and Middle East. Companies with offices, integrators or procurement teams in the UAE, Saudi Arabia, Qatar, Oman and Bahrain can discuss whether a coordinated supply approach is appropriate for branches in different markets.
Availability, delivery options, warranty handling and configuration support may vary by country, order quantity and supply source. A product offered through one regional channel should not automatically be assumed to have identical lead time, pricing, warranty process or local availability in another market. FourTeck can help clarify these points during quotation and identify suitable alternatives where the requested model does not align with the deployment timeline.
Other Options Buyers May Consider
The correct alternative depends on why the five-port model is not enough. Some buyers need more copper ports, some need a larger PoE budget, and others need management, VLANs or fibre uplinks. The cards below provide a starting point for discussing related Grandstream options without assuming that every model is available in every region.
GWN7700
Consider the non-PoE five-port version when endpoints have their own power adapters and the project only needs compact Gigabit switching.
GWN7701P
An eight-port unmanaged model can suit buyers who need more Gigabit connections while retaining four powered ports and simple operation.
GWN7701PA
This alternative is relevant when all eight ports may need PoE and a much larger shared power budget is required.
GWN7702P
A larger unmanaged PoE switch can fit installations requiring sixteen Gigabit ports and more room for endpoint growth.
GWN7801P Managed Switch
Choose a managed family when the project needs VLAN control, monitoring, security functions, fibre uplinks or more structured network administration.
Business Networking Products
Browse wider FourTeck product coverage for switches, routers, wireless access points, firewalls, cabling and related infrastructure.
Why Buyers Choose FourTeck
A productive technology purchase begins with matching the equipment to the operating environment. FourTeck approaches a switch inquiry by looking at connected devices, port count, PoE demand, network structure, installation conditions and future growth. This helps a buyer avoid choosing a product solely because its model number appears close to the requirement.
Assistance with single-device inquiries, branch requirements, project quantities and related equipment.
Review of ports, PoE load, uplink design, management needs and compatible endpoint requirements.
Clear preparation around model, quantity, destination, lead time and project accessories.
Regional coordination based on the confirmed supply route and destination rather than unverified delivery promises.
Help understanding the warranty terms and handling process stated in the final quotation.
Identification of larger unmanaged, managed, multi-Gigabit or higher-power alternatives when appropriate.
This guidance is relevant to small businesses, corporate branches, schools, clinics, hotels, retailers, system integrators and procurement teams. Some buyers need equipment supply only. Others need a reviewed bill of materials that includes access points, phones, cameras, structured cabling, UPS protection and network security. FourTeck can adapt the quotation discussion to the scope provided.
The objective is a supportable purchase. A compact unmanaged switch is an excellent fit when the environment is genuinely simple. When the project needs segmentation, monitoring or more power, recommending a different option can reduce future replacement cost and operational risk. Buyers can contact FourTeck with their device list and deployment plan for a practical review.
Frequently Asked Questions
What is this unmanaged PoE switch used for?
It connects a small group of Ethernet devices and can power up to four compatible PoE endpoints such as IP phones, cameras, access points or intercoms. It is most suitable for simple edge networks that do not require VLAN configuration, remote switch management or detailed per-port controls.
How many PoE devices can it power?
The switch has four IEEE 802.3af/at powered ports. The actual number of devices depends on their combined demand because the total shared budget is 60 W. Each port can provide up to 30 W, but four high-power devices cannot all draw 30 W simultaneously from this model.
Does it need configuration before use?
No switch-management configuration is required. It is designed for plug-and-play operation with automatic speed negotiation and Auto MDI/MDIX. The connected router, firewall, access point, camera, phone or other endpoint may still need its own configuration, and the overall network must be designed correctly.
Can I use all five ports for powered devices?
No. Four ports provide PoE output, while the total number of Ethernet ports is five. A normal installation often uses the fifth port as the uplink toward a router, firewall or larger switch. Confirm the complete port layout before ordering so there is enough connectivity for every device.
Is it suitable for VLAN-based networks?
It does not provide a management interface for assigning VLANs to individual ports or configuring trunks. A managed switch is the safer choice when phones, cameras, staff devices, guests or payment systems must be separated. FourTeck can help identify a managed alternative for that type of design.
Is the switch available for delivery across Africa?
FourTeck supports inquiries across Africa, but availability and delivery arrangements depend on supplier status, quantity, destination and project timing. Request a current quotation rather than assuming local stock. The team can also suggest a related model when availability or lead time does not meet the requirement.
Can FourTeck check my PoE power requirement?
Yes. Provide the exact model number and quantity of each phone, camera, access point or other powered endpoint. FourTeck can compare their stated maximum demand with the 60 W shared budget and flag when a higher-capacity switch or separate power approach would be more appropriate.
What warranty support is available?
Warranty coverage and handling should be confirmed on the final FourTeck quotation because terms can depend on the supply source and destination. Buyers should retain the invoice, serial information and packaging where required and follow the stated process if technical assessment or return handling becomes necessary.
What should I include in a quote request?
Share the required quantity, delivery country, endpoint list, PoE device models, cable distances, project deadline and whether you need supply only or installation support. Also state whether managed switching, VLANs, fibre uplinks, UPS protection or future expansion are part of the wider project.
Can businesses request bulk or project supply?
Yes. Businesses, resellers, integrators and multi-site organisations can submit project quantities and related equipment requirements. A bill of materials may include switches, access points, IP phones, cameras, cabling, racks, UPS systems and security products. Supply timing and regional coordination are confirmed through the quotation process.
Need Help Choosing the Right PoE Switch?
Send FourTeck your device list, PoE requirements, delivery location and project schedule. The team can help review suitability, related models, current availability, warranty guidance and the accessories required for a clean deployment.
Reviews
There are no reviews yet.