Product Overview

A room-scheduling panel becomes far more useful when it is positioned where employees and visitors can see it easily, approach it comfortably and understand room status before opening the door. The Yealink mounting set addresses that practical installation requirement by giving project teams three distinct placement choices rather than forcing every panel into the same orientation. The 0° bracket places the display vertically against a wall for a clean, low-profile appearance. The 20° bracket introduces an angle that can improve visibility and touch access in corridors or entrances where a flush panel would be less convenient. The mullion bracket supports a vertical fit on a compatible door frame, helping installers position the scheduling display beside glazed meeting-room entrances without relying on an unsuitable wall location.

This is a mechanical accessory, not an electronic controller, power supply or room-booking license. Its value lies in creating a stable and organized physical installation for the RoomPanel Plus family. It can be useful in new office fit-outs, room-booking upgrades, hospitality conference facilities, education campuses, healthcare administration areas and existing meeting environments where the panel location needs to match the architecture. The set is particularly practical for organizations managing several rooms with different entrance designs, because the installer can choose the bracket style that best suits each location while maintaining a consistent Yealink scheduling-panel platform.

Correct mounting depends on more than the panel model. Buyers should consider the wall material, door-frame width, glass arrangement, cable route, power method, touch height, viewing direction and any building restrictions on drilling or adhesive fixing. The mount dimensions also matter when the panel is close to trim, signage, access-control devices or door furniture. A bracket that fits the device may still be inappropriate for the planned surface if there is insufficient clearance or if the fixing method is not suitable for the substrate.

FourTeck supports Africa buyers by helping them confirm part number 3311062, identify the intended panel version, estimate project quantity and prepare an accessory list before purchase. This review is useful for single-room installations as well as larger deployments where consistency, spare planning and delivery coordination matter. Buyers can also request guidance on related Yealink scheduling panels, sensors, conferencing systems and network accessories so the mounting decision is considered as part of the full room solution rather than as an isolated item.

Key Business Benefits

For procurement teams, these benefits translate into fewer assumptions during ordering. The mount kit does not remove the need for a site survey, but it gives the project designer recognized options around which the survey can be structured. Instead of asking only whether a panel fits a wall, the team can decide whether the room needs a flush presentation, an angled interaction point or a door-frame placement. That distinction is especially useful when meeting rooms vary in size, partition type and corridor layout. A clear bracket plan also helps the facilities team coordinate cable routing and finish work with the network and audiovisual teams.

Product Highlights

The set is identified by Yealink part number 3311062. Published product information describes three mounting scenarios and emphasizes simple deployment. The kit is associated with RoomPanel Plus, while current channel listings also identify compatibility with RoomPanel Plus E2. Because device revisions, included accessories and regional packaging can change, buyers should confirm the exact panel model and mount-kit contents on the quotation rather than relying only on a family name.

Physical dimensions vary by bracket. The 0° mount measures approximately 136 × 116 × 22 mm, the 20° mount approximately 136 × 116 × 62 mm, and the mullion mount approximately 200 × 93 × 28.5 mm. These measurements help installers check clearance, but they do not replace a review of fixing points, frame geometry and cable exit position. Mounting hardware, adhesives or surface preparation may differ by site and should be selected by a competent installer.

The product’s strongest practical advantage is not complexity but choice. It gives the room designer a compact set of purpose-specific options for different entrances. That flexibility can reduce the need for improvised brackets and makes it easier to maintain a visually coordinated scheduling-panel deployment across a floor, campus or hospitality property.

Technical Specifications

Configuration and Buyer Guidance

Mounting accessories are often ordered late in a collaboration project, yet the bracket choice can affect the finished appearance, touch accessibility and cable route. Before requesting a quotation, identify whether the scheduling panel is already owned, is being purchased with the kit or is part of a wider Yealink deployment. Record the exact model name from the device label or project bill of materials. Family names can be similar, and a bracket intended for one panel size may not suit another.

Warranty and installation responsibility should also be clarified. A product warranty generally does not replace proper site preparation or cover damage caused by unsuitable fixing methods. Ask what is included in the supplied kit, what the installer must provide and whether the project requires on-site installation, remote planning support or supply only. A concise room schedule, photographs and dimension notes can make the quotation discussion faster and more accurate.

Ideal Business Use Cases

The mount kit is also relevant to system integrators and resellers delivering standardized meeting-room packages. Rather than treating installation hardware as an afterthought, integrators can include the bracket decision in the design stage and assign a mounting style to each room. This helps coordinate with facilities contractors, network cabling teams and interior-fit-out partners. It is equally useful in refurbishment projects where existing partitions limit placement choices. The product does not determine the scheduling platform or room-management software; it supports the physical installation of the compatible Yealink panel. Buyers should therefore consider it alongside the panel, power method, network connectivity, room-booking service, sensors and any required licenses.

Yealink RoomPanel Plus Mount Kits: Three-Position Installation Flexibility

The most important feature of this accessory is the ability to select among three genuinely different installation positions. A flush bracket keeps the panel close to the wall and can suit wide corridors or entrances where users stand directly in front of the display. The angled bracket changes the viewing relationship: a 20° projection can help users see and operate the panel while approaching from the side, and it may reduce the need to turn toward a flat wall. The mullion bracket addresses a different architectural problem by allowing a compatible door frame to become the mounting point.

This flexibility matters because meeting-room entrances are rarely uniform. One room may have a masonry wall, another a lightweight partition, and another a glass façade with a narrow metal frame. A single fixed bracket style can force compromises in visibility, cable routing or aesthetics. With the three-position set, the project team can design around the actual entrance instead of moving the panel to an inconvenient location simply because the preferred bracket was unavailable.

The feature should still be used with discipline. An angled mount needs enough clearance for people and doors. A mullion installation depends on frame geometry and suitable fixing points. A flush wall installation requires a prepared surface and a cable exit that does not push the panel away from the wall. The best result comes from matching each bracket to a surveyed location, recording the choice in the project documents and having a competent installer complete the work.

Yealink RoomPanel Plus Mount Kits: Purpose-Built Device Alignment

A purpose-built bracket is valuable because it aligns with the enclosure and mounting interfaces of the intended scheduling panel. Generic tablet holders may appear adaptable, but they can introduce unnecessary bulk, cover device features, complicate cable routing or produce an inconsistent appearance. The Yealink set is designed around the RoomPanel Plus form factor and identifies distinct orientations for wall and mullion placement.

For business buyers, correct alignment contributes to both usability and maintenance. The screen should sit level, remain stable during touch interaction and allow technicians to understand how it is attached. A standardized bracket can make future panel replacement or room changes easier to document because facilities teams are not dealing with a different improvised holder at every entrance. In larger projects, this consistency can be included in handover drawings and asset records.

Compatibility must nevertheless be confirmed. Similar product names do not guarantee identical mounting interfaces, and regional bundles may include different hardware. Buyers should provide the exact panel model and part number to FourTeck. Where RoomPanel Plus E2 is involved, request explicit confirmation on the quotation. This simple step protects the project from ordering a mechanically unsuitable accessory and helps ensure that any required screws, adhesive materials or installation tools are identified before deployment.

Yealink RoomPanel Plus Mount Kits: Clean Multi-Room Deployment

The third major strength is deployment consistency. A room-booking project can involve dozens of entrances, multiple floor layouts and several contractors. Without a defined mounting approach, installers may make different decisions from room to room, leading to uneven heights, inconsistent angles or visible cable differences. A documented bracket set helps the project manager create standards for flush wall, angled wall and mullion scenarios.

A practical rollout plan can label each room with the chosen bracket, mounting height, cable location and surface notes. That plan can then support procurement quantities, installation sequencing and quality checks. For example, rooms with the same glass-partition system may use a shared mullion approach, while rooms along a narrow corridor may use the angled bracket. The result is not only a better visual finish; it also reduces uncertainty for the installation team and makes acceptance testing more straightforward.

Long-term operations benefit as well. Facilities teams can retain spare brackets, update room standards and understand which mount applies when panels are moved. The accessory cost is only one part of the decision. Buyers should also consider installation labor, surface preparation, replacement access and the cost of correcting an unsuitable mount later. A clear bracket strategy can therefore support better lifecycle control even though the kit itself is a simple mechanical product.

Africa Availability and Service Support

FourTeck supports product inquiries across Africa with assistance for part-number confirmation, panel compatibility, bracket selection, quotation preparation and delivery coordination. Availability may vary according to supplier status, order quantity, destination and project timing. Because mounting accessories are often required alongside the main panel, buyers are encouraged to include them in the initial room-technology bill of materials rather than waiting until installation begins.

For a single office, the request can be simple: provide the panel model, preferred mounting style and delivery location. For a larger deployment, a room schedule is more useful. It should show how many entrances need flush wall mounting, how many need angled mounting and how many have suitable mullions. Photographs and dimensions can help identify concerns before the order is finalized, although final responsibility for site suitability remains with the installer or project team.

FourTeck can also help buyers review related Yealink products and alternative brackets when the specified panel is different. Warranty guidance is provided based on the quoted supply route and applicable terms. Delivery arrangements are confirmed during the commercial process rather than assumed from a general product page. This approach gives procurement teams a clearer basis for approval and helps reduce mismatched accessories in multi-room projects.

Contact FourTeck Sales

Africa Country and Regional Coverage

FourTeck assists Africa-focused business buyers by reviewing technical fit and commercial requirements before an order is confirmed. For this mounting kit, the review centers on the exact Yealink panel, the number of rooms, selected bracket type, installation surface, cable arrangement and destination. These points are important because a mechanical accessory can be inexpensive compared with the room system but costly to replace after installers have mobilized or finishes have been completed.

Support can include quotation preparation, quantity planning, related-accessory guidance and coordination of delivery information. Suitable configuration, availability, lead time, package contents, warranty terms and delivery arrangements can differ by supplier position, project scope and destination. Buyers should therefore request a current proposal rather than treating general web information as a confirmed commercial offer. Tanzania, Libya and Seychelles are addressed below with distinct procurement considerations, but the same careful method applies across Africa: identify the panel, survey the entrance and document the mount choice.

Organizations can use the FourTeck Africa technology platform to explore related business solutions and can send project details through the Africa contact team. The goal is to prepare a request that reflects the real operating environment, avoids missing accessories and gives stakeholders a clearer basis for procurement approval.

Yealink RoomPanel Plus Mount Kits in Tanzania

For Tanzanian organizations planning meeting-room upgrades, the practical value of Yealink RoomPanel Plus Mount Kits in Tanzania comes from matching each room entrance to a suitable bracket before installation teams arrive. Growing offices, universities, financial institutions, healthcare administration facilities, public-sector departments, resellers and system integrators may be working with a mix of newly built spaces and older premises. A room survey should therefore record wall construction, door-frame dimensions, glass partitions, cable entry points and the direction from which users approach. The 0° bracket can support a clean vertical presentation where a solid wall and direct viewing position are available. The 20° option may suit a corridor where users need the screen angled toward their path. A mullion installation may be appropriate for a compatible framed glass entrance, provided the frame offers suitable dimensions and fixing conditions. Procurement teams should also confirm whether the RoomPanel Plus devices will use PoE, because network-switch capacity and cabling routes can influence where the panel is placed. For multi-site or phased projects, quantities should be separated by location and bracket style, with a sensible plan for spares and later room changes. FourTeck can help review the panel model, part number, project quantity, related accessories and delivery destination before preparing a quotation. Availability and timing depend on the selected supply route and order details, so buyers should avoid scheduling installers until the commercial and technical requirements are confirmed. A well-prepared request should include room photographs, surface notes, preferred mounting height, installation responsibility and any warranty guidance required by the organization’s procurement process.

Yealink RoomPanel Plus Mount Kits in Libya

Project buyers considering Yealink RoomPanel Plus Mount Kits in Libya should begin with operational continuity and installation readiness rather than treating the bracket as a minor last-minute item. Meeting spaces in corporate offices, energy-sector facilities, education environments, professional-service firms and public institutions may have different entrance finishes and maintenance expectations. The design team should decide whether each panel must sit flush, face approaching users at an angle or attach to a suitable door-frame mullion. That decision affects cable concealment, touch ergonomics, clearance from doors and the appearance of the completed room. Where an existing scheduling panel is being replaced, the old bracket and fixing holes should not be assumed compatible; the exact Yealink model and revision need to be verified. For new projects, the bill of materials should identify part number 3311062 and show the required quantity for every building or phase. It is also useful to specify who supplies surface anchors, who completes installation and whether the contractor needs drawings or sample hardware before full deployment. FourTeck can assist with compatible configuration review, quotation preparation, accessory matching and delivery coordination based on the destination and project scope. No fixed delivery date or local inventory position should be inferred until supplier availability and commercial arrangements are checked. Buyers can strengthen the request by including photographs, frame measurements, panel quantities, preferred bracket types, PoE plans and warranty expectations. This structured information helps purchasing teams compare like-for-like offers, helps installers prepare the correct tools and reduces the risk that a scheduling panel reaches the site without an appropriate method of mounting it securely and neatly.

Yealink RoomPanel Plus Mount Kits in Seychelles

In compact and design-conscious business environments, Yealink RoomPanel Plus Mount Kits in Seychelles can help organizations place scheduling displays without allowing the installation hardware to dominate the entrance. Hospitality groups, government departments, professional services, financial organizations, education providers, healthcare administrators and distributed small or mid-sized businesses may need panels for boardrooms, guest meeting spaces, training rooms or shared offices. Space planning is important: a 20° projection may improve visibility but must not obstruct a narrow circulation path, while a 0° wall fit may provide a lower profile where users can stand directly in front of the screen. A mullion bracket can be considered for a compatible glazed entrance when frame geometry and cable access are suitable. Because island projects often benefit from careful consolidation of equipment requirements, buyers should review the mount kit together with the RoomPanel device, network connectivity, PoE capacity, software platform, sensors and any spare accessories. This reduces the chance of discovering a missing mechanical item after the main technology has arrived. FourTeck can support configuration review, quantity planning, delivery coordination and warranty guidance according to the quoted supply arrangement. A useful request should state the exact panel version, number of rooms, preferred mount for each entrance, surface material, frame measurements, destination and installation schedule. Long-term value also depends on maintainability: technicians should be able to access the panel, understand how it is fixed and replace it without damaging finished surfaces. By documenting the chosen bracket and mounting height for every room, Seychelles organizations can create a consistent standard that supports both a polished guest-facing appearance and practical facilities management over the life of the meeting-space solution.

Other Yealink Options Buyers May Consider

The correct related product depends on whether the buyer is building a new room-scheduling environment, replacing an older panel or sourcing accessories for an existing deployment. The cards below provide useful starting points. Confirm model compatibility, included brackets and current availability before ordering, because similar Yealink products may use different mount dimensions or package contents.

Buyers should not assume that every related product is required. A small installation may need only the mount and an existing compatible panel, while an enterprise project may include panels, sensors, PoE switches, licenses and room systems. FourTeck can help separate essential components from optional enhancements and prepare a consolidated quotation based on the actual room design.

Why Buyers Choose FourTeck

FourTeck works with business buyers who need more than a product name. A mounting-kit request can involve panel compatibility, room quantities, installation surfaces, accessory dependencies and destination-specific commercial requirements. By reviewing these points before quotation, FourTeck helps procurement teams reduce avoidable ordering errors and present a clearer requirement to internal approvers.

The support approach can scale from a single accessory request to a multi-room rollout. Small businesses can receive help confirming whether the kit matches their panel, while integrators and enterprise buyers can submit room schedules and project bills of materials. FourTeck does not rely on unverified stock, delivery or authorization claims. Current commercial details are confirmed in the proposal so buyers can make decisions using information tied to their actual order.

Frequently Asked Questions